دراسة وتقييم قوى الإحتكاك بين السلك التقويمي والحاصرات التقويمية التجميلية
Abstract
لقد كان الهدف من هذه الدراسة هو تقييم قوى الاحتكاك لنوعين من الحاصرات التجميلية الخزفية و البلاستيكية المقواة المتولدة مع نوعين من الأسلاك التقويمية الستانلس ستيل و البيتا تيتانيوم و ذلك بالمقارنة مع حاصرات الستانلس ستيل المعدنية التقليدية التي استخدمت كمجموعة قياس.
استخدمت 10 حاصرات من كل نوع وزعت بالتساوي للاختبار مع نوعي الأسلاك المستخدمة في هذه الدراسة. تم قياس قوى الاحتكاك باستخدام جهاز الأنسترون و أظهرت النتائج أن الحاصرات المعدنية قد أنتجت قيم الاحتكاك الأدنى تلتها الحاصرات الخزفية ثم البلاستيكية المقواة و أظهر تحليل التباين ANOVAأن الفارق بين معدل قوى الاحتكاك المتولدة للمجموعات المختلفة كان ذا مدلول احصائي هام .(P < 0.001) كذلك فقد أظهرت النتائج أن سلك الستانلس ستيل قد ولد قوى احتكاك أقل من سلك البيتا تيتانيوم مع الحاصرات المعدنية و الخزفية بينما أبدى سلك البيتا تيتانيوم قوى احتكاك أدنى مع الحاصرات البلاستيكية المقواة من سلك الستانلس ستيل و كان الفرق بين أداء نوعي الأسلاك المستخدمة مهم احصائيا (P < 0.001).
The aim of this study is to assess the frictional forces of two kinds of aesthetic brackets (ceramic and reinforced plastic) triggered along with two kinds of wire (stainless steel and beta-titanium) vis-a-vis the conventional stainless steel brackets used as some kind of measurement;10 brackets of each kind are used and equally divided to be tested on both wires. The frictional forces are measured by Instron Machine. The results have demonstrated that stainless steel brackets produce the lowest frictional forces compared with ceramic and reinforced plastic. ANOVA has also shown that the difference between the mean friction forces of the test groups is significant (P < 0.001). The results show that stainless steel wire has produced lower friction forces with metal and ceramic brackets than with beta-titanium wire, whereas beta-titanium wire has lower friction forces with reinforced plastic brackets than with stainless steel wire (P < 0.001).
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The authors retain the copyright and grant the right to publish in the magazine for the first time with the transfer of the commercial right to Tishreen University Journal for Research and Scientific Studies - Health Sciences Series
Under a CC BY- NC-SA 04 license that allows others to share the work with of the work's authorship and initial publication in this journal. Authors can use a copy of their articles in their scientific activity, and on their scientific websites, provided that the place of publication is indicted in Tishreen University Journal for Research and Scientific Studies - Health Sciences Series . The Readers have the right to send, print and subscribe to the initial version of the article, and the title of Tishreen University Journal for Research and Scientific Studies - Health Sciences Series Publisher
journal uses a CC BY-NC-SA license which mean
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.